WILKINSON Co.

WK-C1

Standard Bayonet Cap

3¼" OD, slips 3 3/16 " aperture

Cast and machined brass

     This cap is the one found on almost all of Wilkinson's portables. All but the earliest versions have two steel pins that lock the shade on. Shades that accept these pins will have two half-round notches in the aperture. Please specify.

WK-K1

Standard Finial

3 7/8" OD, tapped ¼-20

Cast and machined brass

WK-C2

Standard Hanger Cap

5 1/8 " OD, ½" hole

Cast and machined brass

     This cap was typically soldered into the shade.

WK-H1

Standard Hanger Loop

4" high, tapped ¼ IPS, ¼" hole thru.

Cast brass